Planning and Design of Net Zero Energy Residential Building - Free Final Year Project's

Latest Projects

Post Top Ad

Post Top Ad

Jun 12, 2016

Planning and Design of Net Zero Energy Residential Building

The proposed Civil engineering project on "Net zero residential building" is located at Urapakkam. The NZERB has G+1 floor. The aggregate area surface covered by the Net zero energy residential building is 99 square meters. coCnfiguration should be accomplished for the proposed NZERB using Indian standard codes. There are three main phases in a construction project which are planning, designing and estimation. The first stage in a project is planning, in which preparation of layout of plot has to be done. To conclude the project a detailed estimate of the residential building has also been prepared. You can also Subscribe to FINAL YEAR PROJECT'S by Email for more such projects and seminar.


Planning and Design of Net Zero Energy Residential Building

With the increasing development in the country day by day need of "net zero energy residential building" has also increased. Adopting such building formation can save energy consumption locally and as well as on global scale and we also get huge amount of saving on our electricity bill. The proper design and alignment of the building can make the building cheaper than that of the conventional type of buildings. Usage of hollow bricks and avoidance of columns and beams will result in lowering of temperature inside the building.


Recommended Project: Planning and Design of Net Zero Energy Residential Building


Objective of this project



1. Design a building with Net zero energy concept.

2. To eliminate the necessity of active energy loads on the building.

3. Comparing the net zero energy building with conventional building.


Designing concept of Net zero energy building depends upon many factors. Net-zero energy buildings start with energy-conscious design. A zero-energy residential building is a building with zero net energy consumption. A net-zero energy (NZE) building is one that relies on renewable sources to produce as much energy as it uses, usually as measured over the course of a year.

To eliminate the necessity of active energy loads on the building solar panels are used. Solar panels is one of the technologies used to achieve net-zero status. To eliminate the necessity of active energy loads solar techniques are used which include the use of photovoltaic panels and solar thermal collectors to harness the energy.


Ground Floor Plan of Net Zero Energy Residential Building

The ground floor of the building consist of one hall, two bedrooms, one dinning, one kitchen. The allocations of the rooms in the plan has been done with due consideration of sun diagram as per the requirement of zero energy building. The plan has been prepared using Auto CAD software.

The future scope of such residential building can be extended to designing the "Net Zero Energy Residential Building" which produces its own electricity, thus we can save a huge amount in electricity bill. Use this Civil project report for your reference and study only.


Author:- Karthik.V, Sasidhar Reddy.K.V, Neeraj Porwal, Abhinav. N


Download


Advertisements:-



No comments:

Post a Comment

Ad Post Below